African valve is the top Pneumatic Actuated Valve Supplier in Egypt. Pneumatic Actuated Valves are mechanical devices that utilize compressed air or gas to drive the valve mechanism. They play a crucial role in industries such as oil and gas, chemical processing, water treatment, power generation, and manufacturing, providing efficient and reliable control over fluid flow.
How do pneumatic actuators work?
A Pneumatic Actuator is a device that uses mechanical energy which convert compressed air or gas into mechanical motion
Pneumatic Actuated Valve receives a signal compressed air or gas is directed into the actuator chamber, creating pressure inside.
- The compressed air enters the actuator and applies pressure to the internal components, this pressure creates a force that acts upon the actuator's internal mechanism, starts operating.
- By controlling the direction of airflow, these valves determine the movement of the piston, allowing for precise control over the actuator's motion.
- Pneumatic Actuated Valve typically respond to a control signal, which can be pneumatic, electric, or electronic in nature. This signal decides when and how the actuator should operate.
Types:
- Pneumatic Actuated Ball Valve: Ball valves use a spherical ball to control flow. Pneumatic Actuated is utilizes compressed air or gas to operate an actuator, which in turn controls the opening, closing, or modulation of flow through a ball valve
- Pneumatic Actuated Butterfly Valve: Butterfly valves have a disc-shaped closure element mounted on a rotating shaft that controls the flow by adjusting its angle relative to the flow direction.
- Pneumatic Actuated Gate Valve: These valves operate by raising or lowering the gate to either allow or block the flow of fluid, allowing for precise control over fluid flow in pipelines.
- Pneumatic Actuated Knife Gate Valve: knife gate valve features a sharp-edged gate that slices through the fluid, ensuring a tight seal when closed and minimal resistance when open.actuators offer fast response times and precise control over valve operation.
Industries:
- Oil and Gas Industry
- Chemical Industry
- Petrochemical Industry
- Mining Industry
- Marine Industry
Description:
- Available materials options we supply: WCB, WC6, WCC, LCB, LCC, Cast iron, Ductile Iron, SS316, SS304
- Size: 2" to 80"
- Class: 150 to 300
- Nominal Pressure: PN6 to PN40
- Operation: Pneumatic Actuated
- Ends: Wafer, Lug, Flanged
Configuration of a Pneumatic Actuator:
- 4-20 Mamp
- Pneumatic single acting actuators
- Pneumatic double acting actuators
- Pneumatic rotary actuators
- Pneumatic Scotch and Yoke actuators
- Pressure: 228 bar
Temperature:
- Standard -4°F to 200°F (-20°C to 93°C)
- Low -40°F to 176°F (-40°C to 80°C)
- High 0°F to 300°F (-18°C to 149°C)
Visit our website for more detail: https://www.africanvalve.com/product-category/pneumatic-actuated-valves/